Types of Metal Alloys and When to Use Them
By: Erik Kane | On: July 17, 2018
Remember when we all wondered how the T-1000 was able to liquefy, shapeshift, and repair itself in Terminator 2 back in 1991? We’re told in the film that this
When To Use Metal Hose – 8 Factors to Consider
By: Frank Caprio | On: July 3, 2018
One of the topics we get asked frequently is when to use metal hose. There are many different types of hose available on the market. They include metal, rubber,
Protecting Flexible Metal Hose and Expansion Joints
By: Frank Caprio | On: July 6, 2017
Protecting flexible metal components: why is it so important? After all, they’re made out of metal, right? Corrugated hose and metallic expansion joints are common ways to allow for flexibility
Using Metal Hose for Low Temperature Service
By: Frank Caprio | On: February 10, 2017
Metal hose for low temperature applications? It is well known in our industry that metal corrugated hose is the preferred choice for applications where high temperatures are present, but
Is a Jacketed Hose Assembly the Right Choice?
By: Julie Germano | On: October 26, 2016
Jacketed Hose Assemblies are Right for any Application with Media that Must be Kept at an Elevated, Constant or Controlled Temperature Jacketed assemblies are designed to handle viscous or
Types of Expansion Devices
By: Frank Caprio | On: August 24, 2016
Many types of expansion devices are used in industrial applications. Why are they necessary? As piping systems heat and cool, they experience changes in length caused by thermal expansion
How Hose Master’s Product Analysis Lab Can Help
By: Frank Caprio | On: July 12, 2016
It is important for a salesperson to be able to identify and prevent hose failures at the jobsite. Asking questions about the application requirements, conducting proper training on hose
Fitting Knowledge – How Pipe Differs from Tube
By: Frank Caprio | On: June 24, 2016
End Fittings: How does Pipe differ from Tube? When you look at general fittings classifications, pipe fittings are defined as a part used in a piping system: for changing
Corrugated Metal Hose: Assembly Components and Value
By: Frank Caprio | On: May 31, 2016
If no special options or accessories are needed, there are four basic components to a corrugated metal hose: The tube (or hose itself), the braid, the braid collars, and
Selecting a Metal Hose: 3 Variables to Consider
By: Timothy Martin | On: May 24, 2019
There are 3 key variables in selecting a metal hose: pressure-carrying capability, flexibility, and chemical compatibility. Once you’ve determined your application requires a metal hose, the next step is
Selecting a Metal Hose: 3 Variables to Consider
By: Frank Caprio | On: April 22, 2016
Once you’ve determined your application requires a metal hose, the next step is selecting a metal hose to ensure the assembly will safely meet the rigors of each application.
When To Use Metal Hose – 8 Factors to Consider
By: Rich Troyer | On: March 3, 2016
One of the topics we get asked frequently is when to use metal hose. There are many different types of hose available on the market. They include metal, rubber, composite,
Top 5 Advantages of Using ABS Approved Components
By: Rich Troyer | On: March 1, 2016
The American Bureau of Shipping (ABS) is a provider of marine and offshore classification services. They conduct research and development on marine-related topics, providing technical support and verifying compliance